Uzbekistan (99895) 897-86-65
Russia: (3952) 48-59-63
Russia: (3952) 48-59-63
is a ready-to-use dry-shake hardener designed to create extremely durable, dust-free, and fire-resistant concrete floors in a single application during the concrete placement process.
An ideal solution for new construction of industrial and commercial facilities.
An ideal solution for new construction of industrial and commercial facilities.
Betocem TOP
• 01
Production of dry-shake hardener since 2013
The hardened layer forms a homogeneous, monolithic bond with the concrete substrate.
Betocem TOP is designed to reinforce the surface layer of freshly placed concrete floors exposed to medium and heavy loads.
• 02
Final floor
• 03
finish created in a single cycle during concrete placement
01
The carefully selected particle size distribution of the dry-shake hardener minimizes the risk of delamination when proper application technology is followed.
/
02
During production, our laboratory continuously monitors all parameters that affect the material’s properties.
/
03
Additives that enhance resistance to efflorescence.
/
04
Maximum concentration of targeted functional aggregates combined with high-grade M500 D0 cement.
/
Key Benefits
• 04
The installation time for a concrete floor with a dry-shake hardener does not extend the overall timeline required to prepare the concrete slab for subsequent work.
Rapid commissioning of the facility
The lowest cost per square meter for a finished high-strength, abrasion-resistant floor.
Cost efficiency.
The surface of a concrete slab treated with Betocem TOP achieves high density, preventing the penetration of moisture and aggressive liquids, while remaining vapor-permeable.
Durability
A floor hardened with Betocem TOP exceeds the wear resistance of B25 (M300) grade concrete by several times
• 06
Work conditions:
Before applying impregnation, clean the concrete surface from dirt, oils, dust.
The base must match
requirements of SP 29.13330.2011 Floors.
Updated edition of SNiP 2.0.13-88 Floors, SNiP 3.04.01-87 Insulation and finishing works.
The base must match
requirements of SP 29.13330.2011 Floors.
Updated edition of SNiP 2.0.13-88 Floors, SNiP 3.04.01-87 Insulation and finishing works.
Application Process
• 05
Distribution, leveling, and compaction of the concrete mix.
Preparatory Works
Initial treatment with a power trowel using a pan.
STEP 2
First application of the dry-shake hardener onto the concrete surface using special distribution carts.
Initial troweling of the hardener with a power trowel fitted with a pan.
Initial troweling of the hardener with a power trowel fitted with a pan.
Initial finishing with a power trowel fitted with a pan (disc).
STEP 3
STEP 1
Immediately after the first troweling is completed, a second application of the hardener is carried out.
Finishing the concrete floor surface with power trowel blades to achieve a glossy finish.
Application of a protective coating (sealer) using a roller and sprayer.
Application of a protective coating (sealer) using a roller and sprayer.
STEP 5
Saw-cutting of contraction joints followed by filling with polyurethane sealant.
STEP 6
Second troweling of the hardener with a power trowel using a pan.
STEP 4
